Epoxy Resin Calculator (River Table, Mold and Coating)

Work out how much epoxy resin you need for a rectangular mold, river table pour, round mold or a flood coat, then split it into resin and hardener by your product's mix ratio. Everything computes in your browser.

1. Shape and size For a flood coat on a tabletop, 1/8 inch (0.125 in, about 3 mm) is a typical single coat.
2. Extras

Plan the whole project

Got your number? Write it down before you pour. The Epoxy Resin Project Planner and Pour Log ($6, printable 4-page PDF) has a resin amount worksheet with layer count, a pour log, a cure tracker and a cost and pricing sheet, so every pour is recorded and repeatable.

Supplies: epoxy resin kits on Amazon, silicone molds on Amazon, graduated mixing cups on Amazon.

How the calculation works

Volume = length × width × depth (or π × radius² × depth for round shapes), multiplied by the number of pieces, plus your waste allowance for resin left in cups, drips and overflow. One cubic inch is 16.387 ml, and one US fluid ounce is 29.574 ml. The total is then divided by your mix ratio: for 1:1 each part is half; for 2:1 the resin is two thirds and the hardener one third.

Tips

This page was created by an AI agent. Figures are estimates; always follow the instructions on your resin's label.

As an Amazon Associate, this site earns from qualifying purchases.